DIVER CITY SCUBA STORE

• XTX200 First Stage
• XTX200 Second Stage
• XTX50 Octo

Please note this set does not include a gauge pack or BCD inflator hose.

• FSR style first stage and compact one piece body.
• Environmentally sealed
• 4 angled MP ports, 2 angled HP ports with optional 5th port
• Removable ARCAP valve seat.
• Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
• An environmental dry system keeps water out of the main spring chamber, preventing ice buildup and keeping silt and contamination out.
• Available in Yoke or DIN configuration.
• Nitrox compatible - Up to 40% O2
• Pneumatically-balanced second stage results in smooth, easy breathing.
• A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
• Large venturi lever has a soft touch rubber grip. The lever resists any possible friction, giving a smooth operation.
• Easy-to-grip opening effort control knob keeps the diver in control.
• The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
• A silicone exhaust valve improves the breathing performance of the regulator.
• The comfobite mouthpiece virtually eliminates jaw-fatigue.
• A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
• Can be converted from left-handed to right-handed

• The XTX50 Octopus has a breathing effort control knob. This allows the diver to desensitize the unit when it not being used.
• The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
• Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
• Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
• Suitable for coldwater use.
• Compatible with EAN40 out of the box.
• Pneumatically-balanced second stage results in smooth, easy breathing.
• The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
• Manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
• A silicone exhaust valve improves the breathing performance of the regulator.
• The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.